KISCO (T) [Thai Official Rep. of SEIKI CO.,LTD.]
Valve Gate System & Spear System for Plastic Runnerless era
Valve Gate System & Spear System for Plastic Runnerless era
| System | Product Type | Descriptions | Material Properties （Compatible with all thermoplastics） |
Molded Product Size （Applicable gate diameter: φ0.5toφ8.0） |
Color Changes | Tip Heater | Heating System | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| General Purpose Resin | General Purpose Engineering Resin | Super Engineering Plastics | Reinforcement Material Contains | Small | Medium | Large | ||||||
| Valves System | SVP(F) | •High Performance •All-purpose |
◎ | ◎ | ◎ | ◎ | ◎ | ◎ | ◎ | ○ | Both | External |
| SVPL | •Direct center gate | ◎ | ◎ | ◎ | ◎ | ○ | ◎ | ◎ | ◎ | Both | External | |
| SV32F | •High Performance •All-purpose |
◎ | ◎ | ○ | ○ | ◎ | ◎ | ○ | ◎ | No | External | |
| SV25F | •High Performance •Narrow pitch •All-purpose |
◎ | ◎ | ○ | ○ | ◎ | ◎ | ○ | ○ | No | External | |
| SVY | •Advantageous for optics | ◎ | ◎ | ○ | × | ○ | ◎ | ◎ | ◎ | Both | External | |
| CVN | •Low price •Simple •For general purpose resin |
◎ | ○ | × | × | ◎ | ◎ | ◎ | ○ | No | External | |
| SMV | •For ultra-thin mold •Fixed side mold thickness 120mm •Available in super engineering plastics |
◎ | ◎ | ◎ | ◎ | ◎ | △ | × | ○ | Yes | External | |
| SVPR | •Slim size valve nozzle of 9mm in tip-portion diameter •Gate diameter φ0.8mm to φ1.2mm |
◎ | × | × | × | ◎ | × | × | ◎ | No | External | |
| Spear System | G | •Good color changes •High Performance •All-purpose |
◎ | ◎ | ◎ | ◎ | ◎ | ◎ | ○ | ◎ | Yes | External |
| D | •High Performance •All-purpose |
◎ | ◎ | ◎ | ◎ | ◎ | ◎ | ○ | ○ | Yes | Internal | |
| B | •All-purpose | ◎ | ◎ | ◎ | ◎ | ◎ | ◎ | ◎ | ○ | Yes | Internal | |
| SPT | •Minimum gate pitch 9mm •Available in super engineering plastics •Multiple cavity molding |
◎ | ◎ | ◎ | ◎ | ◎ | ○ | × | ◎ | Yes | External/ Internal |
|
| M | •Available in super engineering plastics •Some tips on one block body |
◎ | ◎ | ◎ | ◎ | ◎ | ◎ | × | ○ | Yes | External/ Internal |
|
| ESXL | •Side gate nozzle for general purpose resin | ◎ | ◎ | ○ | × | ◎ | ◎ | ○ | ○ | No | External/ Internal |
|
| ESN | •For general purpose resin •Tip replacement between several types is available to suit to the resin. •First-in first-out system |
◎ | ○ | × | × | ◎ | ◎ | ○ | ◎ | No | External/ Internal |
|
| SI | •Multiple cavity molding for general purpose resins •Some tips on one block body |
◎ | ○ | × | × | ◎ | ◎ | × | ○ | Yes | External/ Internal |
|
Notes:
◎〇 Recommended
△ Requires Review
× Not Recommended
Please contact us for resin materials other than the above. If you would like to confirm the moldability of the material, we can make a trial production at our technical center in Japan. For more information, please feel free to contact Wada.
wada@kisco-t.co.th
